The Body Scan is used where the surface contamination of persons has to be monitored for a limit value. This is the case at the exit of operational control areas, e.g. in nuclear facilities.

The measuring task of the personal contamination monitor is to prove the exceeding of the limit value of the surface contamination with a high statistical certainty. In the case of non-contaminated persons, however, no contamination alarm should be generated with high statistical certainty.

Description
The Body Scan full body contamination measurement system is a stationary system for monitoring contamination of personnel with high accuracy and high throughput. The whole system consists of 24 detectors in its standard version. For easy use the system is equipped with a touch display and a speaker guides you clearly and understandably through the measurement. Both an entrance and an exit door are available as an option. The Body Scan is designed for use in nuclear power plants and decommissioning.

Features

• Very large active detector surface up to 20.640 cm2 (standard version with 24 detectors).
• Easy maintenance: sophisticated detector plug-in system and service door for quick maintenance access.
• One detector type for the entire system: In case of service, only one detector type is needed for stockpiling.
• Easier installation in hard-to-reach areas: The Body Scan can be dismantled before installation and installed in hard-to-reach positions. This makes it possible to overcome obstacles such as narrow doors or stairs.

For more details, please refer to the Data Sheet